Garden lamps online shop
Technical data
| Cover: | Material brass with graphite coating |
| Feet: | Rubber coating |
| Lampshade: | GVK (glass fibre reinforced plastic) |
| Lampholder: | E27 for all standard incandescent lamps, dimmable incandescent lamps also possible |
| Outdoor power cable: | 5 m with CH plug 3-pole; protection class IP 54 |
| Design protection: | IGE Modèle déposé; Livingdreams Label |
| Sizes: | small deviations possible due to handmade design |
The lampholders have been tested and approved by the Guangdong Testing Institute of Product Quality Supervision (GQI). This institute is a member of the IECEE with headquarters in Geneva, which means that the test is also valid in Switzerland. The lamps including the lampholder (various samples) were also tested and approved by the Intertek test institute. As the lamp socket is in a protected housing, no further protective devices are required, even according to the Ordinance on Low-Voltage Installations. The extra-long cable is fitted with a Swiss mains plug and the 4 rubber feet prevent slipping on slippery floors.
Own Design/Production
Care instructions
To clean the lampshades, you can use a commercial kitchen cleaner by spraying it into the shades. Then you can use a small brush and water (only from the outside) to clean the shades. To freshen up the metal, you can spray a WD40 silicone spray on a rag and rub it on the metal.